From fragmented data to autonomous action.
cMatter connects to the systems you already have, learns how your buildings behave, and acts on what it finds. The longer it runs, the sharper your portfolio gets.
From your building to action, on one path.
Connect anything.
Integrate any device or application through BACnet, Modbus over MQTT or web services and APIs, without touching your control logic. Read-first ingestion.
One data model.
Every point is mapped into a common language, so a chiller reads as a chiller across every vendor and every site. A mixed estate, one standard.
Learn the building.
AgentC builds each asset's normal behaviour and baseline from your own data, then keeps learning as seasons, occupancy and plant condition change.
Close the loop.
Costed recommendations and setpoint changes, executed within the limits you set, with human-in-the-loop consent on critical assets. Gated and logged.
SEE the opportunity. ACT on it. CONTROL the outcome.
One loop, running continuously: forecast what the building will need, choose the right response, make the change, measure the result. Choose a stage below to follow it.
See the demand ahead.
Building electricity demand, kWThree outcomes, from one air handler to a whole portfolio.
Energy use that matches demand.
Waste hidden in everyday operation is found and removed, without new plant.
Problems caught before they escalate.
Your operators get the evidence and the context to act early.
Every action followed through.
What changed, what it saved and what still needs attention, on the record.
One intelligence you talk to. 27 specialists behind it.
AgentC is the one voice. Behind it, each specialist agent has a single job and shares the same live model of your buildings, so a finding from one becomes context for the next.
Energy Performance
4Lower what you spend
Chiller Plant ManagerLow Delta-T EconomistFresh Air ManagerEnergy Performance SchedulerAsset Health
11Keep the building running
Drift SentinelChiller Drift AnalystCondenser Fouling AnalystPump Performance AnalystHeat Exchanger AnalystPower Factor ManagerVFD ManagerSolar Inverter HealthFault DetectivePredictive Maintenance PlannerAsset Life AnalystVisibility
9Show what is really happening
Bill and Utility MonitorOut-of-Hours AuditorEnergy ProfilerLeak DetectiveLoad DisaggregatorSolar Yield AnalystEnergy Storage HealthDecarbonisation AnalystNet Zero TrackerMetering and Assurance
3Measure and prove
Meter and Tariff AnalystM&V AuditorPortfolio AnalystWhat each specialist does27 agents
Energy Performance
Lower what you spendBenchmarks the plant against optimal in real time, catches drift and stages it back.
Spots low delta-T, separates a real fault from low demand, and prices the loss.
Tunes ventilation and fresh-air intake for comfort without over-cooling.
Sets weekly schedules and setpoint progressions for every building.
Asset Health
Keep the building runningWatches every asset for drift from optimal and flags it before it becomes a fault.
Tracks each chiller against its own best and flags creeping performance drift.
Detects condenser fouling from rising approach temperatures and prices the penalty.
Watches chilled-water pump efficiency for wear, cavitation and over-pumping.
Monitors approach temperature and effectiveness across heat exchangers.
Improves power factor to cut demand charges and utility penalties.
Tunes variable-frequency drives to actual load, not full speed.
Watches each inverter for degradation, faults and efficiency loss.
Detects faults and performance deviations in real time, and costs each one.
Predicts equipment failures before they happen and plans the fix.
Tracks duty and wear to protect and extend equipment life.
Visibility
Show what is really happeningReconciles utility bills against meter data and flags billing errors and tariff creep.
Flags consumption when the building should be idle, overnight and at weekends.
Builds consumption profiles by time, system and site to show where energy goes.
Spots abnormal water flow that signals a leak, before it runs up a bill.
Breaks total consumption into end uses without adding sub-meters.
Compares actual generation against expected production and flags underperformance.
Watches batteries and thermal storage for capacity fade and charge and discharge health.
Tracks emissions and models the path to your carbon targets.
Tracks progress toward your net zero target against the pathway you set.
Metering and Assurance
Measure and proveReads meter and utility data, flags out-of-pattern use and tariff exposure.
Verifies savings to IPMVP with audit-ready reporting.
Normalises KPIs across sites and ranks assets by cost, risk and opportunity.
What the platform does.
Demand forecasting
Forecasts each building's demand and consumption from its own history and the weather, so operating decisions are made ahead of time.
Advanced fault detection
Finds equipment deviations worth acting on, shows the evidence, and records whether the fix worked.
Chiller optimisation
Meets cooling demand with less plant energy by setting better operating targets, coordinated with your existing controls.
Portfolio intelligence
One view from the estate down to a single piece of equipment, shaped around who is looking.
Measurement and verification
Savings reported against a defined baseline and boundary to IPMVP, with estimates and verified figures kept apart.
AgentC Controls
Approved changes carried out within the limits you set, logged and reversible. Your operators stay in charge.
Let operation follow demand.
Fixed schedules and setpoints give way to operation that adapts to the building, inside boundaries your team defines.
- Anticipate, then adapt. Forecasts feed scheduling and setpoint decisions.
- You set the limits. Operating ranges, approvals and comfort constraints are yours.
- See what happened. Every command, its readback and the equipment response are on the record.
AHU-03 · Supply air reset
Cooling demand has eased, so the supply air temperature target can rise within its configured range.
Built on the systems you already own.
BMS, CAFM, IoT and metering, connected across vendors through BACnet, Modbus, MQTT and APIs, on cloud or on premise.
Vendor agnostic
Any BMS, any brand, without touching your control logic.
Deploy your way
Cloud or on-premise to meet security and data residency needs.
Evidence behind every finding
Each recommendation traces back to the readings behind it.
Secure and accountable
Every action logged. You set the limits; cMatter works inside them.
See it on your building.
Connect cMatter to one of your assets and see the first findings, and the first savings opportunities, in a matter of weeks.